Nga waahanga hua
1.Low mate parenga
2.Highly roimata ātete
3.Anti-clogging, anti-backflow
4.Ageing-ātete, anti-waikura
5.High te pai, te whakaora hiko
6.Te ora ratonga roa, iti te tiaki
7. Hanganga kiato, tautoko kaha
rauemi
1. EPDM
Ka taea e Epdm te aukati i te wera, te marama, te hāora, ina koa te ozone. Ko te Epdm he kore-polarity, he otinga polarity me te atete matū, he iti te bibulous, he pai nga ahuatanga whakamaarama.
2.Silicon
Kore ki roto i te wai me tetahi whakarewa, kore-paitini me te kore reka, he mea matū e mau ana, engari ko te kawakore kaha, ko te waikawa waiwaro kaore e tauhohe ki tetahi rawa.
3.PTFE
①Teitei me te iti te pāmahana ātete, ka taea e te pāmahana mahi te 250ºC, te uaua miihini pai; ahakoa ka heke te pāmahana ki te -196ºC ka taea hoki te pupuri i te 5% elongation.
②Te waikura - te atete ki te nuinga o nga matū me nga whakarewa, e whakaatu ana i te inertia, te kaha o te waikawa waikawa, te wai me nga momo whakarewa pararopi.
③Te whakahinuhinu teitei - te whakarea waku iti rawa i roto i nga rawa totoka.
④Kore-adhesion - ko te iti rawa o te mahanga o te mata i roto i te papanga totoka me te kore e piri ki tetahi matū
EPDM
PTFE
Silicon
Nga Tono Tikanga
1.Te whakaahuru i te harotoroto ika me etahi atu tono
2.Whakaaetanga o te peeke hau hohonu
3.Whakaaetanga mo te whakakorikori me te tipu maimoatanga wai para kararehe
4.Aeration mo te denitrification / dephosphorization tukanga aerobic
5.Whakaaetanga mo te kukū teitei te peeke wai parae, me te whakamaarama mo te whakahaere i te harotoroto o te tipu maimoatanga wai para
6.Whakaaetanga mo te SBR, MBBR oko tauhohenga, whakapä ki te harotoroto whakapouritanga;whakahohehia te paraka i roto i te tipu tuku para
Tawhā Angamaheni
| Tauira | HLBQ-170 | HLBQ-215 | HLBQ-270 | HLBQ-350 | HLBQ-650 |
| Momo Mirumiru | Mirumiru Kakaaro | Mirumiru Pai | Mirumiru Pai | Mirumiru Pai | Mirumiru Pai |
| Whakaahua |  |  |  |  |  |
| Rahi | 6 inihi | 8 inihi | 9 inihi | 12 inihi | 675*215mm |
| MOC | EPDM / Silicone / PTFE - ABS / Whakakaha PP-GF | ||||
| Kaihono | 3/4''NPT miro tane | ||||
| Te Matotoru Membrane | 2mm | 2mm | 2mm | 2mm | 2mm |
| Rahi Mirumiru | 4-5mm | 1-2mm | 1-2mm | 1-2mm | 1-2mm |
| Rere Hoahoa | 1-5m3/h | 1.5-2.5m3/h | 3-4m3/h | 5-6m3/ha | 6-14m3/h |
| Awhe Rere | 6-9m3/ha | 1-6m3/ha | 1-8m3/h | 1-12m3/h | 1-16m3/h |
| SOTE | ≥10% | ≥38% | ≥38% | ≥38% | ≥40% |
| （6m kua rukuhia） | （6m kua rukuhia） | （6m kua rukuhia） | （6m kua rukuhia） | （6m kua rukuhia） | |
| SOTR | ≥0.21kg O2/h | ≥0.31kg O2/h | ≥0.45kg O2/h | ≥0.75kg O2/h | ≥0.99kg O2/ha |
| SAE | ≥7.5kg O2/kw.h | ≥8.9kg O2/kw.h | ≥8.9kg O2/kw.h | ≥8.9kg O2/kw.h | ≥9.2kg O2/kw.h |
| Mahunga | 2000-3000Pa | 1500-4300Pa | 1500-4300Pa | 1500-4300Pa | 2000-3500Pa |
| Rohe Ratonga | 0.5-0.8m2/pcs | 0.2-0.64m2/pcs | 0.25-1.0m2/pcs | 0.4-1.5m2/pcs | 0.5-0.25m2/pcs |
| Te Ora Mahi | ＞5 tau | ||||
Tarapu & Tukunga
